KIT: 3 Heavy Duty Ball-Bearing Hinges + Gate Closer Spring
Stainless Steel Finish
4-1/2" x 4-1/2" Square Corners (Set of 3)
This kit will allow you to hang the gate with solid, 4-1/2" x 4-1/2" stainless steel hinges and then install the spring to help the gate close.
Ball-bearing hinges are excellent for heavier doors and gates. The ball bearings allow an easier swing and will help prevent the sag that using an inadequate hinge sometimes causes.
This 4-1/2" stainless steel ball-bearing hinge has a stainless steel pin. Fasteners are included. #12 x 1-1/4" size. The finish is Satin Stainless Steel.
A set of three holds a weight of 150lbs. Mounting screws included. Made of Stainless Grade 302/304. These are commercial-grade hinges. (This hinge is provided with 1-1/4" long screws. You may want to substitute your own longer screws to grab deeper into the wood. The spec to ask for at the hardware store is #12 made of 18-8 stainless x whatever length you need.)
- 3 - 4-1/2" x 4-1/2" stainless steel ball-bearing hinges
- stainless steel spring
- tensioning tool for the spring (can also use your own 1/4" socket wrench)
About the spring:
Made of stainless steel, this gate spring will push the gate back closed. You install one bracket to the gate and one to the post (see images below). The spring is always installed on the side of the gate that it swings toward (the side of the gate with the hinges showing) so that it can push the gate closed. Note in the photo below how the spring is installed upper-right to lower-left. The spring always needs to be oriented with the tensioning knob on top-right.
**spring shown in black finish below**
- 13-1/2" overall length
- Spring measures 10-1/2" long x 1-1/8" diameter
This hinge can be installed directly to the surface edge of the gate and edge of the post, or can be mortised for a more finished look. For surface-mounted installations, allow a 5/16" gap between edge of gate and post. For mortise installations, allow a 1/16" to 1/8" gap between edge of gate and post.
Please find links to where you can purchase different sets in the Alternate Configurations section below.
To help you make your gate hinge decisions, we've created the Hinge Chooser that walks you through the process of finding the right options.
ResourcesTo learn more about stainless steel hardware, care, and maintenance, visit our help page.
Product ImagesWe're always looking for new photos of our hardware installed on your projects! Send us your photos for a chance to win $100 off your next order!
Warranty & Return Information
WarrantyHinges: One year finish warranty. More details available here: http://www.pbbinc.com/website/General-Information/One-Year-Finish-Warranty.html
Custom-produced items (stone doorbells, address plaques) and are not returnable. All other merchandise is returnable if it has not be installed. Restocking fees vary by manufacturer; if a return policy is not listed on the item you’re interested in or that you’ve purchased, please contact us and we’ll clarify it.
The return process in a nutshell:
- – Request a return and receive an RGA e-mail with instructions.
- – You’ll ship back the product(s) you want to return.
- – When product(s) is received, we’ll confirm product is undamaged and resellable.*
- – Refund, less $25 processing fee, will be issued.
*To receive a full refund, the original item MUST be in new condition and returned:
- Still in sealed plastic packaging inside product boxes (as originally received)
- Without dirt or sawdust
- Without damage to product finish from incomplete protection during shipment
All returned items are thoroughly inspected, and any item(s) returned in a condition deemed as no longer sellable will not be refunded.Initiate a Return Now
Shipping & Lead Time
Review our shipping rates and policies for more information.