8" Dark Bronze Two-Sided Thumb Latch Package for Double Gates, 3" to 3-1/2" Thick

by     |     SKU: 40-345-Double


Ships Within: 3-5 days.
MSRP: $588.24
Was: $588.24
Sale Price: $541.18
(You save $47.06 )
Send us your photos Write a Review

Order Details

Ships Within: 3-5 days.

8" Dark Bronze Two-Sided Thumb Latch with Straight Drop Bar
Hardware Package for Double Wooden Gates 
Gate Thickness 3" to 3-1/2"

This is a complete package of hardware to hang double garden gates: includes a two-sided thumb latch; a dummy handle for the fixed gate; a set of six solid brass heavy duty ball bearing hinges; and a coordinating gate stop.

This solid Cast Bronze Double Thumb Latch pairs with an simple and straight drop bar to create a traditional gate opener. On the street-side of your gate you install the handle-only portion of the thumb latch. On the yard-side you install the drop-bar and handle.

This package is only for in-swinging gates.

Bronze ages gracefully and may change in appearance due to varying environmental conditions. Bronze patina Finish will develop a wear highlight with frequency of use. When bronze is exposed to air it will tarnish quickly and turn brown. Bronze exposed to exterior elements and conditions will turn green. This discoloration is referred to as patina. This patina process starts immediately upon installation. None of these conditions are considered defects, but part of the natural beauty of ages bronze.

Details:

  • Fits gates 3" to 3-1/2" thick. Additional latches available that fit thicker gates.
  • Mounting hardware included. Extensive installation instructions included.

Dimensions:

  • Handle: 8-3/4" Tall x 1-3/4" Wide
  • Handle on the Drop-Bar Side: 8" Tall x 1-3/4" Wide
  • Important: Please check that the dimensions of this gate latch will fit your particular style of gate!

Ships within 3-5 business days.

how-to-figure-gate-thickness.png

Options
Finish
  • Dark Bronze

Hinges

  • This hardware package includes six - 4" Solid Brass Heavy Duty Ball Bearing Hinges in Oil-Rubbed Bronze finish. Other options include:
  • six 4-1/2" Solid Brass Heavy Duty Ball-Bearing Hinges (Oil-Rubbed Bronze finish)
  • six 5" Solid Brass Heavy Duty Ball-Bearing Hinges (Oil-Rubbed Bronze finish)
  • six 4" Solid  Bronze Heavy Duty Template Hinges (same material as the latch, but smooth finish; not ball bearing)
  • six 4" Solid Bronze Heavy Duty Hinges (same material as the latch, same textured finish; not ball bearing; available with Button Tip, Ball Tip and Steeple Tip

  • coastal-bronze-hinge-options-gate-door-hardware.jpg
Technical Info

Hardware Tips

About This Bronze Hardware:

This bronze hardware contains 90% copper and 10% tin. When it first leaves the mold, the hardware is copper-penny colored. Next, the pieces are patina’d dark bronze. Finally, the hardware has an exterior-grade dark bronze-colored wax applied to it that adds to its weather- and wear-resistance. Bronze ages gracefully and may change in appearance due to varying environmental conditions. The wax helps maintain the color of the hardware for the long term under most conditions. On items like gate latches and door handles where your hand comes in contact with the material regularly: we’ve seen over time that the oils on your skin will slowly wear down the wax where the skin contacts the metal. On all other items where skin doesn’t come in contact with the hardware, you should see dark bronze coloration for the long term.

How does this hardware hold up to the elements? 

When submitted to a salt-water chamber test, this hardware began to patina at the 16-hour-mark, versus 10-hours for other name-brand, high end bronze products. A client recently wrote that this hardware installed on an waterfront boathouse two years ago looks slightly darker and shinier than the original, but looks otherwise exceptional.

The bottom line is: this hardware is the perfect choice for oceanfront, waterfront, and coastal installations.

To read about the ways you can care for your bronze hardware, see our Bronze Care page.

Applying Wax

All bronze darkens with age, however waxing may slow the process of oxidation.

To apply the wax, you need two 1- to 2-inch paint brushes that will be used only for cleaning bronze. Do not use brushes that have been used for other purposes as chemicals may remain in the bristles and transferred to the patina finish, may cause permanent discoloration.

Start by applying a protective circle of tape around the metal ferrules that hold the bristles in the brushes you are using. This will help prevent scratching of the surface when applying the wax and when dusting.

Wipe bronze free of-any dust and fingerprints using a clean, dry, cotton cloth. Use one of the brushes to remove dust from small crevices or hard to reach places.

Use "Renaissance'' wax, or other "microcrystalline'' waxes, because they are inert and will not yellow over time. Apply to the second brush, with three or four, back and forth, sweeping strokes. Do not dab the brush in the wax. This could cause an abundance of wax to be applied to the bronze that could actually harm the patina surface. Dab the brush on the lid of the wax can to remove any excess wax. Lightly apply a super thin coat of wax to the surface of the bronze using gentle sweeping motions. Apply more wax to the brush as described, working it down into crevices.

Caution - Using too much wax may remove previous layers of wax. It is very important not to apply too much wax or work it into the surface too vigorously. Cover the entire surface with wax and let it dry according to the directions on the container.

Separate Your Brushes 

Keep your brushes separate in labeled bags, free from contaminants, for future use. Use a clean, dry, cotton cloth to gently rub, in a circular motion, the dried wax from the bronze surface until you achieve the desired sheen. To achieve a dull finish, do not rub the surface after waxing.

To achieve a better protective coating, you may want to re-apply a second coat using the same technique.

Outdoor Bronze Hardware

Outdoor bronze requires a regular maintenance program, which keeps the product surfaces clean and waxed.

Outdoor gate hardware falls into several types of gate latches: thumb latches, ring latches, lever latches, and bolt latches. Each operates slightly differently and brings a different aesthetic to your gate hardware installation. The categories of gate latches include spring loaded, bolt latches, and gravity latches.

We discuss all of these factors and more at our informational blog entry titled Gate Latch Information Series.

Take a look at the Gate Hardware section of our blog for helpful suggestions. 

Resources

Installation Instructions Available here.
Please review our Resources page for general information about all our products.
FAQs
Read our FAQs for additional information about various products and policies.
Take a look at the Answering Customer Questions section of our blog for a deeper look at same of our product types and manufacturers.
Product Images
We're always looking for new photos of our hardware installed on your projects! Send us your photos for a chance to win $100 off your next order!
Solid Bronze Coastal Bronze Double Sided Thumb Latch 40 340 40 330 40 345 40 335 Coastal Bronze Double Sided Thumb Latch 40 340 40 330 40 345 40 335 Coastal Bronze Double Thumb Latch Swinging Side 40 330 40 340 40 345 40 33Coastal Bronze Two Sided Thumb Latch On Wooden Gate 40 340 40 330 40 335 40 345 Outswinging Double Wooden Gate With Coastal Bronze Thumb Latch 40 300 Straight And Coastal Bronze Gate Stop 50 250Double Gate Hardware With Coastal Bronze Gate Hardware 70-100 Grille And 80-100 Cane BoltBronze Latch for Carriage House Doors with Dummy Handledouble-thumb-latch-40-330-40-335-40-340-40-345-on-ornate-wood-gate.jpg
Availability:
Ships Within: 3-5 days.
Review our shipping rates and policies for more information.
Finish:
Dark Bronze
Material:
Cast Bronze
Style:
Rustic
Style:
Transitional
Style:
Traditional
Style:
Antique
Style:
Classic
Latch Type:
Thumb
Latch Type:
Gravity
Swing Type:
Inswing
Swing Type:
Outswing
Fits Gate Thickness:
3"
Fits Gate Thickness:
3-1/8"
Fits Gate Thickness:
3-1/4"
Fits Gate Thickness:
3-3/8"
Fits Gate Thickness:
3-1/2"
Warranty
Coastal Bronze warrants all flat goods (non-locking) to be free of defects in material and craftsmanship for five years from the original invoice date. Coastal Bronze warrants all locking goods, including locks, latches and deadbolts, to be free of defects in material and craftsmanship for 1 year from the original invoice date. In areas of high humidity or proximity to ocean, warranty is 6 months. Coastal Bronze adds a patina to all products to simulate aged bronze. Finishes will develop a wear highlight and may change color based on environment. This is not considered a defect, but part of the natural beauty of aged bronze.
Returns
Return Policy: This product can be returned in its original condition (original packaging intact, uninstalled, can be put back on the shelf directly) with a 10% restocking fee. If any effort is required to repackage or review the hardware, the restocking fee will be 25%. Customer responsible for return shipping. To initiate a return, please complete the Return Form.

Initiate a Return Now