Cheyenne Sandcast Bronze Mortise Entry Lockset
with your choice of interior knob or lever
This sandcast bronze mortise entry set is elegant architectural front door hardware. With a stately design and your choice of three finishes, these entry locks are suitable for the very finest homes and their exterior doors.
A combination of decorative door hardware and functional entry lock set, the arched plates and generously proportioned handle add dimension to the look. Choose from various levers and knobs to complete the inside trim. The mortise lock has a Schlage C Keyway.
Details about this Mortise Hardware:
- Material: Solid Sandcast Bronze
- Mechanism: Mortise Lock
- Finishes Available: Flat Black Bronze, Medium Bronze, and Tumbled White Bronze.
- Set Includes: Outside trim with handle and lock, inside trim plate and lever/knob of your choice, spindle, mortise box and cylinder, strike and square edge faceplate.
- Fits Doors: 1-3/4" thick to 2-3/4" thick (Required with order)
- Suitable For: Entry Doors
- Handing: Required with order
- Inswing or Outswing: Required with order
- Backset: 2-1/2" is standard; 2-3/4" optional
Dimensions of this Mortise Entry Lock:
- Exterior Projection is 3-1/8”
- Interior Projection Depends on Handle Style
- Overall Grip thickness: 1-3/4"
- Clearance between door & grip is 1-3/4”
- Plates thickness: 1/2"
How To Order:
1) Choose Finish:
2) Choose Knob or Lever for Inside Trim:
3) Choose Backset
4) Choose Door Thickness:
5) Choose Handing:
6) Choose Inswing (shown above) or Outswing
7) Choose Mortise Lock Preference
Please find links to where you can purchase different styles of lock sets in the Alternate Configurations section below.
- Arched Plate Mortise Entry Lock Set
- Artemis Brass Mortise Entry Lock Set by Emtek
- Charleston Brass Mortise Entry LockSet by Emtek
- Cheyenne Sandcast Bronze Mortise Entry LockSet by Emtek
- Craftsman Arts & Crafts Brass Full Length Mortise Entry LockSet
- Craftsman Arts & Crafts Brass Mortise Entry LockSet by Emtek
- Denver Sandcast Bronze Mortise Entry LockSet by Emtek
- Euro Style Plate Mortise Entry Lock Set
- Hamilton Brass Mortise Entry LockSet by Emtek
- Hera Brass Mortise Entry Lock Set by Emtek
- Manhattan Brass Mortise Entry LockSet by Emtek
- Melrose Brass Mortise Entry LockSet by Emtek
- Memphis Brass Mortise Entry Lock Set by Emtek
- Mills Brass Mortise Entry LockSet by Emtek
- Morgan Sandcast Bronze Mortise Entry LockSet by Emtek
- Rectangular Full Length Sandcast Bronze Mortise Entry LockSet
- Rectangular Monolithic Sandcast Bronze Mortise Entry LockSet
- Rectangular Sectional Sandcast Bronze Mortise Entry LockSet
- Regency Brass Mortise Entry LockSet by Emtek
- Rockford Sandcast Bronze Mortise Entry LockSet by Emtek
- Salem Brass Mortise Entry LockSet by Emtek
- Square Plate Mortise Entry Lock Set
WarrantyFinish Warranty: Door Hardware in Polished Brass-Lifetime and Polished Nickel-Lifetime finishes carry a lifetime limited finish warranty. There is no finish warranty on Deep Burgundy, Medium Bronze Patina, Flat Black Patina, Silver Patina, Rust, Polished White Bronze, and Tumbled White Bronze finishes. All other finishes carry a five year finish warranty. Full details available here: http://emtek.com/warranty.php
ReturnsThis product can be returned in its original condition (original packaging intact, uninstalled, can be put back on the shelf directly) with a 10% restocking fee. If any effort is required to repackage or review the hardware, the restocking fee will be 25%. Customer responsible for return shipping. To initiate a return, please complete the Return Form. Initiate a Return Now
Add A Dummy Handle for Double Gates?If you have a double gate, it’s an option to add a dummy handle to the outside of the inactive gate. The dummy handle gives a ‘finished’ and symmetrical look to the gates and provides a handle to pull and push the inactive gate with. For gates that will be used frequently by people who aren’t familiar with the gate: dummy handles can also cause confusion because a visitor doesn’t know which handle is operable.
Add A Gate Stop?A gate stop is needed on all gates. The stops that we have are attached to the gate and catch on the post when the gate is pushed closed. The stop maintains the proper alignment so that the latch can latch, but won’t be damaged if the gate is slammed.
Add Jar of Touch-Up PaintEach cranked band strap hinge comes with a carriage bolt, which is installed through the hinge and through the door/gate. These bolts have a silver finish. At installation, you can paint the carriage bolt’s head black with optional touch-up paint.
Add Cane Bolt?A cane bolt is needed when you have a double gate set. The cane bolt holds the inactive gate down to the ground. It can also be used to hold a gate open. Sometimes two cane bolts are used on double gates (one on each gate) so the gates can be held open (in the case of a driveway gate, for example).
Add Faux Butt Hinge?These decorative strap hinges have an optional piece, the Faux Butt Hinge. When you install it, it makes for a larger appearing hinge. All parts are still decorative.
BacksetThe backset is the distance from the edge of the door or gate to the centerpoint of the through-hole of the hardware. Dummy handles do not require a backset.
Deadbolts can be either “single cylinder” or “double cylinder”. Single means there is a key hole on the outside and a thumbturn on the inside. Double means there is a key hole on both sides of the deadbolt.
Do you need concealed fasteners?On Emtek’s door hardware you have the option for concealed fasteners. Rather than seeing the screws on the interior side of the hardware, the concealed fasteners allow you to have finished appearance on both sides.
Door thicknessRefer to the range of acceptable thicknesses on the product description, and then choose your door’s thickness. Try to choose a thickness within 1/8” of your actual thickness.
When you need a dummy handle, you’ll need to choose which side to order. There are two options: Left and Right. Refer to the image below to determine your dummy handle.
Extension Kit for Gates up to 3.5"These latches fit gates up to 2-1/2” with the standard tongue. With the addition of an extended tongue piece, you can fit a gate or door up to 3-1/2” thick.
Gate ThicknessRefer to the range of acceptable thicknesses on the product description, and then choose your gate’s thickness. Try to choose a thickness within 1/8” of your actual thickness.
HingeA number of hinge options are available. Butt hinges work on gates that are ~6 feet high and 42” wide. A thicker gate can use a bigger butt hinge than a thinner gate. If the gate or door is wider than 48”, you should choose a strap hinge.
Interior Door FunctionWhen you need a dummy handle, you’ll need to choose which side to order. There are two options: Left and Right. Refer to the image below to determine your dummy handle.
- Passage Function: Passage or Hall and Closet Lever Handles are used on doors that do not require a locking mechanism. Halls, closets, pantry or laundry doors will generally use a passage leverset. Passage levers do not have a locking mechanism.
- Privacy Function: Privacy Hardware are most often used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Emtek privacy levers have a push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some levers will have a pin hole inside a circular piece, some just have a small pinhole.
- Dummy Function: Emtek Double Dummy Door Knobs are sold in pairs. Dummy knobs do not have a latch or mechanism of any kind. These door knobs are surface mounted to a door that has not been bored (large hole cut out). Dummy knobs are generally used on double doors that us a ball catch at the top to keep them closed so a latch is not required. They are also commonly found on the inactive side of a french door - a single dummy mounted on either side of the inactive door.
Key All Deadbolts Alike?If you’re ordering two or more deadbolts, you have the option to use the same key for both, so that you don’t have to use separate keys. If you’re ordering one deadbolt choose “Single Lock or Not Keyed Alike.”
Mortise Lock Type
Rosette StyleThe rosette is the plate portion of your hardware. Choose the rosette that works best for the style you desire.
Screw Shape & LengthHex head screws are made of stainless steel and finished dark to coordinate with the hardware. Square head screws are made of a rust-resistant material (not stainless) and finished dark to coordinate with the hardware. If you’re in a coastal area, choosing the hex head fasteners is the best choice.
Standing in Front of the Gate, Which Way Does It Swing?This gate latch is handed one direction or the other. For single gates, you can answer the handing questions from either side of the gate as long you answer both questions standing in the same position. For double gates: answer the handing question for the active gate (the one that will have the latch installed).
Standing in the same position, what side is the gate hinged on?This gate latch is handed one direction or the other. For single gates, you can answer the handing questions from either side of the gate as long you answer both questions standing in the same position. For double gates: answer the handing question for the active gate (the one that will have the latch installed).
Type of Strike
Surface strike: will be installed to the face of the post (or the face of the second gate if this is a double gate).
Mortise strike: will be installed the inner edge of the post (or the edge of the second gate if this is a double gate).