24" Heavy Duty Cranked Band Strap Hinges (Black) - Set of 3

By

$218.50
24" Heavy Duty Cranked Band Strap Hinges (Black) - Set of 3

24" Steel Cranked Band Hinges - set of 3
A Heavy Duty Strap Hinge in Black Powdercoat Finish

This set of three steel strap hinges is a terrific option when you're looking for a heavy duty black hinge. Black powdercoat finish helps you coordinate with other hardware.

In the square hole on the strap, you insert the included carriage bolt for additional rigidity to the installation (a through-bolt). Please specify the thickness of your gate or door, so that we may send the appropriate carriage bolt length. Carriage bolt is hot dipped galvanized (not black). We recommend touching up the top (once installed) with black spray paint or order a bottle of touch-up paint with your order.

Details for this strap hinge hardware: 

  • Material: Hot dipped galvanized steel with powdercoat
  • Finishes available: Black powdercoat 
  • Set includes mounting hardware, including 1/2" carriage bolt (with nuts and washers) and 2" #12 stainless steel screws
  • Fits gates and doors up to 5" thick 
  • Suitable for in-swinging and out-swinging gates, but the hinges must be installed on the side of the gate that it opens toward.
  • Sold as a set of three (three pintles + three straps + three carriage bolts + fasteners).

Dimensions of this steel gate strap hinge:

  • Strap Hinge: 24.5"l x 2.25"h x 3/16" thick
  • Pintle: 6.5"h x 2.25"w x 5/8" diameter. 

Installation Options

  1. Flush Mount. Flush mount is when the surface of the gate is flush with the surface of the post. Flush Mount has a recommended 1/8" to 1/4" gap between gate and post. "Pin Up" installation has the pintles installed pointing upward, so that you can lift off the gate or door. "Pin Down" installation has the top pintle pointing downward and the bottom pintle pointing upward, so the door or gate can't be lifted off.
    cranked-band-hinge-and-pintle-by-snug-cottage-hardware.jpg

  2. Jamb Mount. This method finds the pintle installed to the jamb. The hinge is on the surface of the gate, and the gate is snugged up to the jamb. Jamb Mount has a recommended 1/8" to 1/4" gap between gate and post. The distance from the front hinge-surface of the gate to the outer edge of post must be at least 2-3/8" (see diagram, distance "A"). "Pin Down" installation has the top pintle pointing downward and the bottom pintle pointing upward, so the door or gate can't be lifted off. "Pin Up" installation has the pintles installed pointing upward, so that you can lift off the gate or door. 
    heavy-duty-strap-hinge-hardware-8295-18.jpg
Options

Gate Thickness

  • Select the thickness of the gate this will be installed on.  

Touch up Paint

Please find links to where you can purchase different sizes and quantity sets in the Alternate Configurations section below.

Shipping & Lead Time
Ships within 1 week
Standard shipping rates and policies apply. 
Hardware Tips

Interested in more info about strap hinges? Read about tips and installation here.

Take a look at the Gate Hardware section of our blog for helpful suggestions. 

Resources

Please review our Resources page for general information about all our products.

FAQs
How much weight do these hold?
The rule of thumb is that the length of the strap hinges should be 1/4 to 1/3 of the width of your gate or door. If the gate or door is over 6' high, you should add a third hinge. These hinges can be used for carriage house doors, shed doors, or gates.
how-much-weight-can-a-strap-hinge-hold-s.jpg
Read our FAQs for additional information about various products and policies.
Take a look at the Answering Customer Questions section of our blog for a deeper look at same of our product types and manufacturers.
SKU:
8295-24SP*3
Finish:
Satin Black
Material:
Galvanized Steel
Style:
Antique
Style:
Rustic
Style:
Traditional
Style:
Classic
Warranty
Snug Cottage Hardware, LLC guarantees our BPPCG product. We will replace free of charge any BPPCG product that breaks and is found defective for the life time of the original purchaser. Product must have been installed and maintained as per instructions supplied with original product. More details available here: http://www.snugcottagehardware.com/Header%20Buttons%20Pages/Snug%20Cottage%20Difference.html
Returns
This product can be returned in its original condition (original packaging intact, uninstalled, can be put back on the shelf directly) with a 10% restocking fee. If any effort is required to repackage or review the hardware, the restocking fee will be 25%. Customer responsible for return shipping. To initiate return, please complete the Return Form.

Initiate a Return Now
(No reviews yet) Write a Review